Fortify Clear

Product Chlorine Dioxide Fortify Clear

Fortify Clear

DISINFECTANT

Fortify Clear Disinfectant is a liquid chlorine dioxide product for use in irrigation systems and cleaning hard surfaces. This product is safe to use with in-line fertigation systems and direct applications to clean and disinfect hard surfaces.

Chlorine dioxide is the preferred alternative to other options such as ozone, chlorine bleach, hydrogen peroxide and peracetic acid. Compared to these other options, a chlorine dioxide application is far less corrosive and much safer for the environment.

CHLORINE DIOXIDE ADVANTAGES

  • Destroys biofilm quickly and efficiently.
  • Highly effective against bacteria, viruses, protozoa, mold, algae, odor etc.
  • EPA, FDA, NSF certified.
  • Safe, ready-to-use ClO2 concentrated solution.

 

APPLICATION RATES

PURPOSE TARGET CIO2 PPM DILUTION RATE VOLUME (mL/gal) VOLUME (oz/gal)
Soaking 50 1:60 63 2.1
Sanitizing drip lines 250 1:12 315 10.7
Irrigation system maintenance* 0.25 1:12000 0.3 0.01

 

SAFETY INSTRUCTIONS

  • When handling Fortify Clear Disinfectant, protective gloves should be worn. Although this does not contain acid, ClO2 can absorb through the skin so contact should be avoided/minimized.
  • Whenever a container of Fortify Clear Disinfectant is opened, the individual should wear at a minimum a cartridge respirator to avoid irritation from any ClO2 gas that escapes the container.
  • Goggles should be worn to prevent splashes from entering the eyes.
  • Dispensing of Fortify Clear Disinfectant should take place in a lab hood or well-ventilated area.
  • If a container of Fortify Clear Disinfectant must be left open (for pumping or other operations) a vent or hood should be used to prevent ClO2 gas from accumulating in the nearby surroundings.
  • Do not heat ClO2 solutions above 90°F and never use an open flame to heat the solution.

 

DOSING INSTRUCTIONS

  • Add 1 mL of Fortify Clear Disinfectant to 3 L of water for every ppm of dosage desired (e.g. 3 mL in 3 L is a 3 ppm dosage).
  • Inject ClO2 under the surface of the liquid to be treated to prevent gas off.
  • Store Fortify Clear Disinfectant in a cool dark place to prevent ClO2 degradation.
*Concentrated stock tank ratios

Irrigation System Maintenance — Stock Tank Mixing Rates
INJECTION RATIO 1:10 1:100 1:250 1:500 1:750 1:1000 1:3000
FORTIFY CLEAR (oz/gal) 0.1 1.0 2.5 5.0 7.6 10.1 30.4
FORTIFY CLEAR (mL/gal) 3 30 75 150 225 300 900